[Geopriv] RE: [Ecrit] thomson-geopriv-lis-discovery-03

(Bring this back to Geopriv...)

Hi Cullen,

Thanks for your comments.

Re 1.2: HTTP-based services require a path as well as a host and port. We would have to bastardize HTTP to avoid that.

Re 4.2.1.1: UPnP is specifically suggested because the way that it works is to find the next layer out from the Device. We aren't looking for a public address; instead, we are actually looking for an address in the next nearest network layer. This is on the assumption that a LIS in that layer is more likely to be able to locate us. (Actually, the piece of UPnP that is required is relatively small - perform discovery, find devices that support the WANIPConnection profile, call GetExternalIPAddress on that device).

The reason that we can't rely on the domain name is that a domain name extracted from a device like a home router isn't useful for discovery. Note that the home router case also drives the UPnP recommendation, particularly for layered NAT.

Ta,
Martin

> -----Original Message-----
> From: Cullen Jennings [mailto:fluffy@cisco.com]
> Sent: Friday, 30 November 2007 2:42 PM
> To: ECRIT
> Subject: [Ecrit] thomson-geopriv-lis-discovery-03
>
>
> This does a nice job of laying out the options. Few questions ...
>
> Section 1.2. Do we really need to discover a URI or would host, port,
> and type of protocol be enough? If so, SRV would be simpler and more
> widely supported.
>
> Section 4.2.1.1 UPnP would not work in many of the cases we are
> interested in such as layered NAT and even worse it may not be
> possible to detect this failure. I would not be in favor of UPnP
> unless it really was the only solution. It is also very complicated
> to spec the exact parts of it you would need - UPnP is a lot of things.
>
> Do we have any idea how common DHCP without a domain name option is?
> I'm wondering if people would bother to implement way to get IP for
> reverse IP approaches.
>
> Cullen <with my individual contributor hat on>
>
>
> _______________________________________________
> Ecrit mailing list
> Ecrit@ietf.org
> https://www1.ietf.org/mailman/listinfo/ecrit

------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.
If you have received it in error, please notify the sender
immediately and delete the original. Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]

_______________________________________________
Geopriv mailing list
Geopriv@ietf.org
https://www1.ietf.org/mailman/listinfo/geopriv
Received on Thu, 29 Nov 2007 23:34:19 -0600